SIO-2 ANETO 3D white porcelain 5kg

The popular ANETO porcelain adapted for 3D printing. ANETO is a translucent white porcelain which stands out for its high plasticity. Its formula is very stable and provides a secure firing range between 1230 and 1270 ºC. Available in extruded body with the ideal humidity for 3D printing. Presented in a practical 5 kg cylindrical format with double packaging.

Firing range*: 1230-1270 ºC / Cone 6-9
Biscuit temperature: 1000 ºC / Cone 06
Water content: 25 %
Plasticity (IP Atterberg): 11
Carbonate content (CaCO3): 0 %
Drying shrinkage: 7 % aprox
Firing shrinkage 1250 ºC: 11.2 %
Porosity (water absorption) 1250 ºC: 0.0 %
Dry bending strength: 3.1 N/mm2
Fired bending strength 1250 ºC: 51.5 N/mm2
Thermal coefficient 1250 ºC (25-500 ºC): 63.7x10^-7 ºC^-1

(*) Firing range recommended for the clay to develop its best performance, both in terms of technical and safety characteristics, under conventional firing conditions. The colour samples may show temperatures outside the recommended range to provide a broader view, but these are pieces fired under controlled conditions. Cone equivalence according to Orton table for self-supporting cones, regular-SSB and  60 ºC/hr heating rate.